KEY FEATURES
- The ONLY HDBaseT ™ certified tester in the market
- Certification for 4K cable infrastructure in under 10 seconds
- Mains / battery powered unit 4 hours from a single charge
- Built in WiFi access point for remote testing capabilities
- Integrated video guides and user manual
- Log file analysis provided by an MSolutions professional
- Expansion modules (Extra Cost) cover: DC Resistance, HDMI Cable Testing, HDBaseT™ Spec 2.0
- Expansion for AV over IP testing (via firmware update to MS-TestPro)
- Detailed performance analysis of twisted pair infrastructure
- Data taken at both TX and RX
- Simple to understand traffic light system
- Performance thresholds outlined on GUI
AWARDS
- ISE Top New Technology award 2018 testing category - WINNER
- Installation Best of Show Award 2018 - WINNER
- CEPro 2017 CEDIA Best in Class - WINNER
- rAVe Best of Infocomm 2017 - WINNER
WHY TEST?
- HDBaseT™ is a live stream modulated data transport medium
- Requires up to 8Gbps pass through
- Inadequate cabling infrastructure can lead to intermittent drop out of signal meaning loss of video / audio
- Leave site with 100% certainty the cabling will work
- Call outs cost both time and money for SI’s
- Customers using MS TestPro have seen up to a 40% decrease* in return site visits
HDBaseT™ ANALYSIS INCLUDES
- Pixel Clock
- Chipset in use
- Feature/control support
- Cable length (5% tolerance)
- HDCP
DCR (DC RESISTANCE) MODULE
DC Resistance Module - checks DC Resistance of CATx cables compliant with IEEE802.3bt, confirming ability to provide a sufficient level of power across a link.
- Measure DC Resistance of CATx cable to ensure capability to pass PoE /PoH effectively to the IEEE 802.3bt standard
- Can be used for both HDBaseT™ , IP, and PoE infrastructures
TESTS
- DC Loop Resistance in ohms of a cable
- Unbalanced Parallel DC Resistance displays the parallel resistance of the two CATx conductors in each cable
- Unbalanced Pair to Pair Resistance displays the difference between the four pairs in the cable
HCT (HDMI CABLE TEST) MODULE
HDMI Cable Test Module - ensures compliance to Standard / High-Speed bandwidth requirements including 18Gbps support.
- End to end HDBaseT™ and HDMI testing and diagnostics
- Ensures compliance with HDMI standard / high speed bandwidth requirements, including 18Gbps support
- Quick, simplified HDMI cable troubleshooting
- Expands testing coverage saves both time and money
- Verifies support for HDMI2.x Ethernet and HEAC
- Checks all 19 pins connectivity
- Fast report generation in .pdf format
- Future proofed for 8K testing (firmware update)
AVoIP LICENSE AV OVER IP MODULE
AV over IP Network Capability Test upgrade - MAC/IP addresses with Ping and config, network nodes, SNMP information, IGMP Snooping for VLAN / fast leave.
Snapshot of AVoIP configuration
- MAC / IP addresses, ping time & current config
- Number of present nodes on the network
- Simple Network Management Protocol (SNMP information)
Internet Group Management Protocol (IGMP) Snooping including:
- VLAN set up
- Fast / immediate leave support
- Pre- populated with specific switch vendor parameters for custom testing & reporting
- Delivered via firmware update to MS-TestPro unit
