KLEAR K-7 4K TEST ALL Pro CCTV Meter is an installation and troubleshooting tester for digital/IP, HD coax and analogue CCTV camera systems. With a single tester that can power, configure and document, The K-7 4K TEST Pro CCTV Meter increases productivity from start to finish.
- 7" 1920x1200 IPS Touch Screen
- Up to 8MP TVI/CVI/AHD BNC supported
- Up to 12MP IP Camera supported*
- 4K30 HDMI Input & Output
- Wi-Fi built-in
- 12VDC 3A, 24VDC 2A, 5VDC 2A (power bank) & 48V POE Outputs
- Cable Tracer: search coaxial / network / telephone cables
- UTP Cable Tester
- Video Level Meter
- PTZ / RS485 Control
- CVBS supported
- H.265/H.264
- Audio Input
- BNC Loop Output
- 7.6V 7500mAh Lithium Battery, up to 16 hours working time. Quick charge at 3.5hours.
- Dimensions: 255 x 160 x 46 mm
- Weight: 0.95Kg
- *12MP substream; mainstream up to 8MP
Additional Features on K-7 4K TEST
- TDR: checks for breaks in coaxial cable, network cable, telephone cable, elevator cable and identifies the distance where there is a break up to 1.2KM
- RJ45 TDR: Test cable pair status, length, attenuation, reflectivity, impedance, skew & more (up to 180m)
- Digital Multimeter: DC & AC voltmeter, measures resistance / diode / capacitance, continuity test
- Optical Power Meter: Wavelength: 1625,1550nm,1490nm,1310nm,1300nm,850nm; -70 ~ +10 dbm for optical power testing and Fiber link loss relative test
- Visual Fault Locator: 10mW visual fault locator with 650nm wavelength emits red laser to test multi-mode and single mode fiber’s bending and breakage up to 10KM
- HD-SDI, EX-SDI, 3G-SDI Supported
