The DrayTek POE600-K Gigabit Passive Power Over Ethernet PoE Injector is intended for use with the VigorAP 918RPD and 920RPD (sold separately, see accessories tab). When used to power the VigorAP 918RPD, the access point can then provide up to 16W power output to a device connected to its PoE Out port, over a 100 metre CAT5e/CAT6 cable run.
Physical Interfaces/Controls
1 x Gigabit Ethernet LAN Port, RJ45 (Data In)
1 x Gigabit Ethernet PoE LAN Port, RJ45 (Data+PoE Out)
1 x IEC-C13 Mains Power Socket
2 x Mounting Tabs
Compatible with
VigorAP 918RPD
VigorAP 920RPD
Data In & Data Out Port Data Rates
100Mb/s
1000Mb/s
Power Over Ethernet Specifications
56 Volts power output
1.1 Amp current
60 Watts total power output
For use with VigorAP RPD models only (see accessories tab)
Passive PoE Injector - Not IEEE 802.3af/at standards compliant
RJ45 PoE Pinout:
Positive: Pins 1, 2, 4, 5
Negative: Pins 3, 6, 7, 8
Power Specifications
100-240 VAC power input
Up to 1.5 Amps current draw
60 Watts total power output
IEC-C13 Mains power input
For use with VigorAP RPD models only (see accessories tab)
Passive PoE Injector - Not IEEE 802.3af/at standards compliant
Operating Requirements
Indoor use / installation only
Weight: 235 Grams
Dimensions:
Length: 170mm
Width: 58mm
Height: 41mm
Package Contents
1 x DrayTek VigorPoE 600
1 x 2m IEC-C13 Mains Power Cable (UK)
