Do you need a good-looking access reader for your project? All the residents of luxury residences will be delighted with the 2N Access Unit 2.0. Select modern access with a mobile phone or fingerprint. Do you prefer conventional methods? We also offer an RFID card reader or keypad. Cannot decide? Select a combination of several methods in one device. But don’t look for controllers in our portfolio. They are already an integral part of every reader.
- Ideal for residential projects
- Fastest Bluetooth technology
- You don’t need a controller
| Interfaces | |
| Power supply: | PoE and/or 12 V/1 A DC |
| PoE: | 802.3af (Class 0–12.95 W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack |
| (2N® Access Unit Bluetooth has terminal block or pigtail RJ-45) | |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12 V DC/max 600 mA |
| Passive switch: | NO/NC contacts, up to 30 V/1 A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30 V to +30 V DC) |
| (2N® Access Unit Bluetooth has 3 inputs) | |
| OFF = open or Uin> 1.5 V | |
| ON = short-circuit or Uin< 1.5 V | |
| Tamper switch: | native part of the 2N Access Unit 2.0 |
| Audio: | buzzer (97dBA) |
| Supported protocols: | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
| Bluetooth Reader | |
| Version: | compatible with Bluetooth 5.0 LE |
| Range: | (short - typically up to 3m*, long - typically up to 10m*) *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment |
| Security: | RSA-1024 and AES-128 encryption |
| RX sensitivity: Mode: | up to -93 dBm touch, tap in app |
| Mobile Application Support | |
| Android 6.0 and higher, iOS 12.0 and higher | |
| RFID Card Reader | |
| Supported frequencies | 125 kHz variant |
| 13.56 MHz variant | |
| 125 kHz and 13.56 MHz variant | |
| Supported card types | card type compatibility depends on Order No. |
| 125 kHz | EM4xxx |
| HID Prox – versions with 125 kHz support and S in Order No. Only | |
| 13.56 MHz | ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key) |
| reads UID (CSN) and secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
| Secured 13.56 MHz | ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE) |
| reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Touch Keypad | |
| Technology: | capacitive touch technology |
| high touch layer sensitivity (0.1pF) | |
| Reliability: | regular automatic calibration (SmartSense Auto-tuning) |
| does not detect false touches on wet surface | |
| Signalling: | configurable backlight intensity |
| indication using multicoloured LEDs | |
| acoustic response for every keypad touch | |
