The ETH-SP is a cost-effective solution for protecting sensitive, third-party Ethernet devices from damaging electrostatic discharge and surges.
Since all Ubiquiti airMAX devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network.
The ETH-SP is engineered to protect any Power-over-Ethernet (PoE) or non-PoE device with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.
Ideal for WISP Networks
All Ubiquiti airMAX devices are equipped with ESD protection. However, to protect third-party devices, the ETH-SP provides essential ESD protection to guard against costly service calls and downtime.
For example, protect your subscriber networks by installing the ETH-SP next to CPE devices. Damaging ESD attacks and surges will be diverted to the ETH-SP and safely discharged into the ground, so the CPE and other network devices are protected.
Specifications:
- Dimensions: 91 x 61 x 32.5 mm
- Weight: 80g
- Interface Connections: 2x RJ45
- ESD/EMP Protection: Absorbing Transient Current with Responce to Surge Voltage from 100V/s to 1kV/us
- DC Spart-Over Voltage: 90V @ 100V/s
- Maximum Impulse Spark-over Voltage: 700V @ 1kV/us
- Discharge Current: 5kA Maximum / 0.5kA Normal
- Maximum Insulation Resistance: 1Gohm @50V
- Maximum Capacitance: 1.0 pF @ 1MHz
- Data Line Protection: RJ45 10/100/1000 Ethernet
- IEEE 802.3af POE Support: Yes
- Shock and Vibration Certification: ETSI300-019-1.4 Standard
- Operating Temperature: -30 to 65 C
- Operating Humidity: 10 to 90% Noncondensing
